Cardioid Condenser Lavalier Mic for A-T UniPak Wireless Systems
Product Description
This clip-on lavalier mic provides crisp, full-sounding voice and instrument pickup. It also excels in acoustic guitar applications and features excellent gain before feedback and suppression of background noise. It operates on phantom power only and has a 55 in. (1.4 m) cable terminated with 4-pin HRS connector for A-T UniPak wireless systems.
ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 40-16,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY: -42 dB (7.9 mV) re 1V at 1 Pa
IMPEDANCE: 250 ohms
MAXIMUM INPUT SOUND LEVEL: 141 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical): 112 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 65 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical
WEIGHT (MICROPHONE): 0.1 oz (2.8 g)
DIMENSIONS (MICROPHONE): 0.98" (25.0 mm) long,
0.40" (10.2 mm) diameter
CABLE: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor, shielded cable
ACCESSORIES FURNISHED: Clothing clip; AT8116 windscreen
ELEMENT: Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN: Cardioid
FREQUENCY RESPONSE: 40-16,000 Hz
LOW FREQUENCY ROLL-OFF: 80 Hz, 18 dB/octave
OPEN CIRCUIT SENSITIVITY: -42 dB (7.9 mV) re 1V at 1 Pa
IMPEDANCE: 250 ohms
MAXIMUM INPUT SOUND LEVEL: 141 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical): 112 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO: 65 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS: 11-52V DC, 2 mA typical
WEIGHT (MICROPHONE): 0.1 oz (2.8 g)
DIMENSIONS (MICROPHONE): 0.98" (25.0 mm) long,
0.40" (10.2 mm) diameter
CABLE: 4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor, shielded cable
ACCESSORIES FURNISHED: Clothing clip; AT8116 windscreen
Product Features
- Clip-on lavalier mic also excels in acoustic guitar applications
- Provides crisp, full-sounding voice and instrument pickup
- Excellent gain before feedback and suppression of background noise
- Operates on phantom power only