Commercial Audio Series 80W Single-Zone Amplifier
Item Unavailable
To get notified when this product becomes available, click the button below. We'll send you an email when it's back in stock.
Product Description
The Crown 180A is a high-value amplifier for commercial and industrial audio. It provides 4-ohm and constant-voltage outputs (70V and 100V), along with all necessary features in a simple building-block format. The sound system can be upgraded as a facility expands. For example, you can add more mixers for more inputs, or add more power amps (or mixer-amps) to handle more zones.
Some applications include schools, hospitals, factories, restaurant/retail, houses of worship, fitness facilities, A/V boardrooms, prisons, and small offices. Typical uses are paging, background music, security and evacuation instructions.
Output Power: 80W into 4 ohms or 70V/100V
Input Sensitivity: 800 mV
Input Impedance: 100 k ohms
Frequency Response: 70Hz - 19kHz (@ 1W from 4 ohm Tap)
20Hz - 20kHz (@ Line Out)
Signal-to-Noise Ratio: 85 dB
Total Harmonic Distortion (THD): Less than 0.5%
Input Connections: 1 x 3-Pin Phoenix-Type (Balanced)
Output Connectors: 1 x 4-Position Terminal Strip
1 x VCA 4-Pin Phoenix-Type Connector
1 x 3-Pin Phoenix-Type Connector (Balanced)
Controls Front Panel: On/Off Button
1 x Detented Volume Control Knob
1 x Each of Non-Detented Bass and Treble Controls
Controls (Rear): Reset Button
Indicators: Front-Panel Power, Signal, and Clip LEDs
Cooling: Convection Cooled
Dimensions (WxHxD): 19 x 3.5 x 12.2" (483 x 89 x 310 mm)
Weight: 21 lbs (9.5 kg)
Some applications include schools, hospitals, factories, restaurant/retail, houses of worship, fitness facilities, A/V boardrooms, prisons, and small offices. Typical uses are paging, background music, security and evacuation instructions.
Output Power: 80W into 4 ohms or 70V/100V
Input Sensitivity: 800 mV
Input Impedance: 100 k ohms
Frequency Response: 70Hz - 19kHz (@ 1W from 4 ohm Tap)
20Hz - 20kHz (@ Line Out)
Signal-to-Noise Ratio: 85 dB
Total Harmonic Distortion (THD): Less than 0.5%
Input Connections: 1 x 3-Pin Phoenix-Type (Balanced)
Output Connectors: 1 x 4-Position Terminal Strip
1 x VCA 4-Pin Phoenix-Type Connector
1 x 3-Pin Phoenix-Type Connector (Balanced)
Controls Front Panel: On/Off Button
1 x Detented Volume Control Knob
1 x Each of Non-Detented Bass and Treble Controls
Controls (Rear): Reset Button
Indicators: Front-Panel Power, Signal, and Clip LEDs
Cooling: Convection Cooled
Dimensions (WxHxD): 19 x 3.5 x 12.2" (483 x 89 x 310 mm)
Weight: 21 lbs (9.5 kg)
Product Features
- 1 input and one 80W power amplifier for single-zone systems
- Ideal for commercial and industrial use
- Balanced Phoenix-type line inputs
- Touch-proofed screw-terminal speaker outputs
- Advanced protection system includes output current limiting, DC protection, circuit breaker/fuse, and thermal protection
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications