WD Licensed By Fender Replacement Baritone 24 Fret Neck For Stratocaster Maple

This Fender® Licensed Baritone conversion neck is simply the best on the market. Using a unique 26 2/3 (26.67 in.) scale length, these necks will convert any standard Strat® into a baritone guitar with a low end punch that you just have to experience to believe. The necks are already finished in a super thin clear satin poly for your convenience and no modifications to your guitar are necessary. All you have to do is change the strings to a baritone set after you set up the neck. Nut not included.

All necks require a final level, crown, and polish and may need to be fine-tuned to your instrument and playing preferences. Your new neck should be carefully inspected prior to installation and/or modification as necks are rendered non-returnable once altered. Due to the organic nature of wood each neck is considered unique and may have minor variations in grain or finish from those pictured. WD does not sell what is commonly referred to as seconds or blems. Due to the volume of necks that we sell WD does not hand-select necks based on appearance or weight. WD neck heels are made to Fender USA dimensions and tolerance, this may not account for neck pocket shrinkage or expansion over time. Some neck pocket modification may be required.

WD recommends that if you are not familiar with replacement neck installation that you contact a qualified luthier or repair shop.